IntermecIF30**RFID盒式数据终端

是否提供加工定制：否 类型：数据采集器 型号：IF30 墨轮尺寸：100（mm） 印字速度：100（mm/秒） 重量：3.06（kg） 外形尺寸：323.5*226*82.5（mm） **：Intermec OEM：否 质保：1（年） Features Dense reader mode enables superior adjacent dock door readingConveyor reading up to 1600 fpmDirectly monitors and controls presence detectors and ** lightsMulti-protocol reading and writing of UHF RFID tagsFactory configurable to operate in 865MHz, 869MHz or 915MHz RFID bandsOn-board device managementBuilt in power supplyProduct Overview The IF30 is a cost-effective, high performance fixed reader that reliably reads and writes UHF RFID tags in “RF noisy” environments. The IF30’s receive sensitivity enables large populations of tags to be interrogated at high speeds, which is critical to many use cases involving dock doors, portals and conveyors. In addition to reading tags at distances over 15 feet (4.6 meters), the IF30 can filter tag data to prevent sending redundant information to the host system. With best in class Dense Reader Mode performance, the IF30 fixed reader allows users to grow their RFID operations to include multiple dock doors in close proximity, thus enabling accurate, automated receiving and shipment verification. This drives more effective put away processes. Increased receive sensitivity allows the IF30 to interrogate weaker/unreadable tags that often lead to expensive exception handling processes and slower supply chain throughput. Unlike all competitors, the IF30 has a built-in power supply and 4 mono-static RF ports which reduce the costs and complexity at installation with fewer component pieces to complete the overall solution. Continuing to focus on keeping the costs of ancillary equipment and installation low, the IF30 fixed reader includes powered general purpose input/output (GPIO) circuitry, which allows direct monitoring and/or controlling of peripherals such as presence detectors and ** lights without requiring extra devices and power supplies to facilitate the connection. Accessories Antennas, antenna cables, mounting bracket Air Interface Protocols EPCglobal UHF Gen 2, ISO 18000-6b, ISO 18000-6c, Philips Version 1.19, Fairchild G1 Certifications FCC, ETSI Connector Ethernet IPv4 & IPv6, RS232 for configuration Environment Operating Temperature :-20°C to 55°C (-13°F to 131°F)Storage Temperature :-30ºC to 75ºC (-22°F to 167°F)Humidity :10% to 90% (Non-condensing)Environmental Protection :IP53 compliant Frequency Range 865, 869 and 915 MHz Physical Characteristics Length :323.5 mm (12.74″)Width :226.0 mm (8.90″)Height :82.5 mm (3.25″)Weight :6.75lbs (3.06 Kg) Power 110-240 VAC auto rangingPower Supply is internal and includedDuty Cycle :**